If you live in a house with double hung wooden windows you might love their classic look but not love the amount of cold air that seeps in between the upper and lower window or at the bottom of the window. I experience this problem even with the storm window in place, sometimes to the point of having frost. I wanted a way to decrease drafts without something ugly that mars the look of my windows (like foam, caulking or felt strips that always come off. I realized that if you simply take scrap paper or newspaper, tear it into strips and fold it longways two or three times (depending on the width of the gap) you can really cut down on the amount of cold air getting into your house. Simply fold so that it is perhaps a quarter inch wide. Slip into any gaps where your bare hand can feel cold air getting in including along the sill but most importantly the line between where the upper and lower parts of the window meet, where the lock usually is. You will probably find that each window needs three or four different pieces of paper because some places will be tight, some will need just a double folded piece and some require more. It seems too minor to make a difference but your house will be more comfortable, less drafty and you will save on your heating bill. Remember that one 3 foot wide window with just an 1/16th gap is the equivalent of a 2 inch square hole in the window letting in cold (if my dusty math skills are correct). The advantage to this system is it is free, uses supplies you have on hand and works. The disadvantage is that once you crack the window open in early spring... all those pieces of paper flutter out. It usually takes me less than an hour each fall to do my whole small house.
Tuesday, May 30, 2017
Cheap ways to insulate old windows
Labels:
cheap,
Diy,
double hung,
double-hung,
draft,
Free,
insulate,
insulation,
weatherize,
Window,
winter
Uses for dehumidifier water
If you have a basement and live in anywhere but the desert then chances are you have a dehumidifier or two that run in warm weather. Now a dehumidifier pulls water vapor from the air and turns it into basically distilled water. It is not drinkable because it may have bacteria from the machine and the collection bucket. It is also not ideal for plants, especially edible plants, because it could have metals from the machine but that doesn't mean you need to throw it out. Many people will tell you to use it in your iron to avoid hard water deposits. I also use it for mopping floors since, unlike tap water, it won't leave any deposits. You could also use it to wash off stoops (something we do a lot of here thanks to free range chickens always peeking in the backdoor to see if any treats are coming). I mist my houseplants with a spray bottle of it when they start to look dusty. The fact that it is distilled water means it won't leave hard water deposits on the leaves. It's deposit free nature also makes it ideal for rinsing windows or a spot free shine on your car. I mop the floor of the basement with it once or twice a year. If you really want to save water you can refill the tank on your toilet bowl after you flush. And some people pre-soak especially dirty laundry in it. Remember to minimize contaminants and increase efficiency by cleaning any filters on your dehumidifier regularly. This will also increase the life of your appliance. With all these great uses you may find emptying the bucket to be slightly less of a hassle.
Labels:
Dehumidifier,
house,
household,
re-use,
recycle,
repurpose,
reuse,
uses,
wastewater,
water
Subscribe to:
Posts (Atom)